- Sleek design mounts flush with standard decorative wall plate (not included)
- Two-operating modes: manual (conventional on and off switch), automatic
- Programming: up to 7-programs (7-on and off times) per week. A program can apply to a single day or repeat every day (a program that repeats every day is still considered one-program)
- Connection: 3-wire (line, load, neutral and 2400-Watt maximum)
- Dimensions (height by width by depth): 2.7-Inch by 1.8-Inch by 1.6-Inch
Product Description
2400-watt programmable timer features 7 different programmable sequences. Don’t come home to a dark house. Program your lights to turn on automatically at specific times with the Aube 7-Day, 2400W Timer, an attractive high-capacity programmable timer that works with motors as well as all types of lighting, including electronic ballasts, compact fluorescent lights and tungsten lights up to 5A. Unlike standard programmable timers, the 2400-watt Aube 7-Day Timer can be used to control any lights or appliances up to 20 amps. A Decora-style wall plate is not included. Easily record up to seven separate on and off sequences, which can be programmed daily or weekly. Need to find something quickly late at night? No problem: The Aube 7-Day, 2400W Timer offers a manual override, which enables the load to be turned on and off without affecting the programming. Programs are protected against a power failure by a pre-installed rechargeable battery. Mount the Aube 7-Day, 2400W Timer onto a standard single or multi-gang electrical box and connect the line, neutral and load wires. The timer may be used for a single-pole switch installation. Program the date and time and then your seven on and off sequences, and the Aube 7-Day, 2400W Timer will make sure your lights are on when you get home after dark. Additional features include an LCD that shows the time, day and load status.
Aube by Honeywell TI033/U 7-Day Programmable Timer Switch, White
Need a timer for the lights in front of the house. Found this timer and give it a try. The setup is pretty quick, just follow the instruction provided from the package. It works as what I need, on and off at destinated time. The only thing I will love to see is LED backlite on the LCD screen. The LCD is hard to read in the upright angle, I need to band down a little to see the screen letters… back lite should help.
Rating: 4 / 5
I bought this product in October of 2009. I have three installed: 1 for the front outside lights, 1 for the lamppost, and 1 for the outside garage lights. The challenge is having all of the lights come on at the same time. If you synchronize all of the timers to a single clock you’ll find that after time they “walk” slightly in either direction. I have not touched them in the last 30 days and between the three timers they may be 3-5 seconds apart. Not sure how that happens with a digital (as opposed to analog) display but that is the case here. They are relatively easy to install and set. Several programs make them flexible if you want them to come on at different times on different days.
Rating: 4 / 5
THIS IS MY SECOND SWITCH AND WORKS WITHOUT A PROBLEM i WOULD RECOMMEND IT TO ANYONE. i HAVE IT WORKING MY OUTDOOR COMPACT FLOURCESENT BULBS.
Rating: 5 / 5
Had no trouble installing.It did fit into my original switchbox.My trouble is in the programming.The display is LCD, not backlit and small.Does it work? I might not ever know.
Rating: 2 / 5
I couldn’t use it in my older house.
But that’s not the units fault.
Rating: 3 / 5